Designed specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a life line. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.
Buckingham has developed a bucket restraint system to address the concern of the OSHA compliance officers allowing a full body harness and 6 foot lanyard to fall from the basket and hit an object below.
The Bee-Line 3/8" (10mm) single eye stitched split tail offers the user the ability to make a Blake's or Tautline hitch onto their climbing line for ascending and for maneuvering around the tree. The two inch stitched pattern creating the eye is covered with heat shrink tubing for longer wear. The stitched eye is tested to meet a minimum 5,000 lbs. tensile pull. IMPORTANT: all split tail knots shall have a stopper knot and must be set before using.
(Option +H) The Big BuckSnap now features a larger opening that allows the user to easily connect over 4" angle iron. New design also allows for ease of detachment. A radiused (rounded) inner edge is designed to prevent damage to conductors when used in hot work applications. It also has a radiused attachment eye to prevent damage to aluminum connectors. Meets ANSI Z359.12 specification. 3600lb. gate load requirement.
Hard rubber bottom equipment bag has a 2" molded rubber lip that prevents water from seeping into the bottom of the bag. Heavy gauge rubber bottom is double stitched to the bag; very durable, even in cold weather.
The 3118 Big Buck climber pad utilizes a double strap system, that fits 1" and 1 1/4" straps, to secure the pad to the calf resulting in superior support of the leg. An angled metal insert prevents the climber shank from shifting on the calf and the thick felt padding adds to the overall comfort. Comes with 2 pair of 2639 straps (Big Buck pads require 2 pair of leg straps). of Measures 9" H x 12 1/2" W.
Leather gaff guard that is designed to work on all manufactuers replaceable or permenant pole gaff climbers. hook and loop closure prevents guard from sliding off gaff when not in use. Reinforced with steel rivets to prevent gaff tip from protruding out from bottom.
The Bee-Line 3/8" (10mm) eye to eye stitched tail allows the user to create a closed friction hitch such as the Schwabisch prusik or the Distel. There are other hitches too; all require the user to practice tying and use prior to working at heights. The two inch stitched pattern creating the eyes are covered with heat shrink tubing for longer wear. The stitched eyes are tested to meet a minimum 5,000 lbs. tensile pull.
We guarantee the equipment we manufacture to be free from defects in material and workmanship. We will repair or replace any equipment deemed to be defective which is returned to us by the original purchaser. This express guarantee supersedes all other expressed or implied guarantees, obligations or liabilities.